The global site of the UK's leading magazine for automation, motion engineering and power transmission
7 March, 2021

Drones and mics help to spot conveyor problems

22 December, 2020

The German conveyor belt manufacturer Continental has developed a technology that uses drones and acoustic monitoring to identify potential problems on large-scale conveyors before costly damage occurs. The technology replaces laborious manual inspections by using sensor-based technologies that allow precise inspection and enable predictive maintenance.

The system focuses on finding defective idlers, which are estimated to be responsible for 30% of the operating faults on large belt conveyors. A mid-sized conveyor system in the mining sector, for example, might have a 40km-long belt running over around 120,000 idlers.

Open and outdoor sections of such conveyors are inspected from the air using drones equipped with cameras and infrared sensors that monitor both sides of the conveyor. After the drone has flown over a section, it returns to a charging station where it uploads the data to the cloud via an IoT module while it is being recharged. The image data is processed using an AI-assisted algorithm and analysed to detect any idler defects.



For covered or underground conveyors, monitoring is carried out using microphones installed every 20–25m that capture any changes in the acoustic signatures of the idlers. The audio signals are recorded twice a day and uploaded to the cloud. Signals that might indicate a damaged idler are then investigated using an AI-based algorithm.

“Conventional and often manual inspection methods can be very time-consuming, imprecise or even dangerous for service technicians because of the belt lengths or local circumstances such as underground routing and enclosed sections,” explains Clemens Panzer, a member of the Continental team that developed the technology. “Documentation is also often performed manually, with reports having to be input subsequently into the relevant datasets. Maintenance intervals also frequently follow a fixed rotational principle, meaning that measures required on short notice to avoid or prevent conveyor failures cannot be carried out in a timely manner.”

The new sensor-based inspection approach, by contrast, allows data-assisted remote monitoring of conveyor system condition to detect potential damage at an early stage. “Changes in the conveyor condition over an extended period can be analysed better using the stored historical data, and the anticipated service life of the components can also be better estimated,” Panzer explains.

Continental’s conveyor monitoring system listens for tell-tale acoustic signals that could indicate faulty idlers

The system has been tested successfully in field trials. More pilot projects are now planned, and the system is expected to become available during 2021.

The belt-monitoring technology was developed to the prototype stage in just two months by a multi-disciplinary team at Continental’s start-up organisation called Co-pace.

ContinentalTwitter  LinkedIn




Magazine
  • To view a digital copy of the latest issue of Drives & Controls, click here.

    To visit the digital library of past issues, click here

    To subscribe to the magazine, click here

     

Exhibition

Drives Show 2022The next Drives & Controls Exhibition and Conference will take place in Birmingham, UK, from 5-7 April, 2022. For more information on the event, visit the Show Web site

Poll

"Do you think that robots create or destroy jobs?"

Newsletter
Newsletter

Events

Most Read Articles