The global site of the UK's leading magazine for automation, motion engineering and power transmission
16 June, 2024

Twitter link
News » Product News 

Micro-PLC with Web server packs the power of a PAC

20 May, 2016

Japan’s Idec Corporation has released a micro-PLC which, it claims, offers the power of a PAC (programmable automation controller) and supports up to 520 I/O. The FC6A MicroSmart controller can execute basic instructions in 0.042µs, has a 640kB program memory, incorporates 1,024 timers and 512 counters (including six high-speed timers capable of up to 100kHz), has a built-in Web server, and can handle large programs with complex control requirements such as PID, flow totalisation and recipes.

VSD-based hydraulic pack cuts energy use by up to 80%

18 May, 2016

Rexroth has developed a hydraulic power pack for machinery that integrates all of the hydraulic and electrical components, along with a variable-speed drive, to produce a compact system that can cut energy consumption by up to 80%. The plug-and-run CytroPac system also simplifies commissioning and maintenance.

‘First’ type 3 safety light grids will cut machine costs

18 May, 2016

The German safety specialist Pilz says it has developed the world’s first type 3 light grids, thus closing the “type gap” in the revised version of IEC 61496-1. The new PSENopt II grids offer level d (PL d) performance, avoiding the need to switch to type 4 grids to achieve PL d. They can be used to implement the performance level that precisely matches the safety requirement, without costly over-sizing.

‘Game-changing’ soft-starts act as complete control systems

17 May, 2016

At the recent Hannover Fair, the New Zealand soft-start specialist AuCom announced a  “game-changing” range that, it predicts, will challenge industry approaches to fixed-speed motor control. The EMX4i low-voltage soft-starts offer the option of plugging in application-specific cards.

Single-tool valve system is fast and easy to assemble

16 May, 2016

At the recent Hannover Fair, Aventics launched a modular pneumatic valve system designed to cut the number of components needed and to simplify assembly by using a single tool. The time-saving ES05 Essential Valve System is said to reduce the risk of faults and to offer a cost-effective, tailored way of meeting users’ needs.

Compact 20-axis controller promises big-system benefits

13 May, 2016

Rockwell Automation has announced a compact industrial controller for high-speed applications with up to 20 axes of motion which, it claims, has up to 20% more application capacity than its previous CompactLogix controllers. The new Allen-Bradley CompactLogix 5380 controller offers the benefits of Rockwell’s high-performance Integrated Architecture portfolio in a small format.

Inductive system reads absolute linear positions to ±4µm

12 May, 2016

Rexroth has developed a robust linear measuring system that reads absolute positions inductively to an accuracy of ±4µm – similar to that of glass scales. The company is building the IMS-A system into its linear guides, thus avoiding the need for external measurement or air purge systems. It says that the system is immune to contamination, vibrations, shocks and magnetic interference and needs no buffer batteries in the event of a power failure.

Connector with ‘first’ with built-in Ethernet switch

11 May, 2016

Harting claims to have developed the first connector with a built-in Ethernet switch. Its new Han-Modular US4 connector can be used to network up to four EtherNet/IP or Profinet nodes with transmission speeds of up to 1,000 Mbit/s.

Tester analyses running motors without using sensors

10 May, 2016

Fluke has announced a motor tester that analyses a motor’s electrical and mechanical performance while it is running, without needing any mechanical load sensors. The Fluke 438-II power quality and motor analyser uses “innovative” algorithms to analyse not only three-phase power quality, but also torque, efficiency, and speed, to determine a motor's performance and to detect overload conditions.

Plug-in drives modules save space and cut costs

09 May, 2016

At the recent Hannover Fair, Beckhoff announced a series of space-saving drives modules in a plug-in format for machines being built in volume production runs. The EtherCat-based EJ series modules make it possible to achieve high-volume runs without sacrificing customisation.

£2m investment in machinery leads to a trio of couplings

09 May, 2016

Following a £2m investment in new production machinery, the UK manufacturer Renold Couplings announced three new ranges of couplings at the recent Drives & Controls Show.

Build your own robot arms from €243 per axis

09 May, 2016

The German engineering plastics specialist igus is pushing further into the world of robotics with a kit system that will allow users to create plastic-and-aluminium robot arms with up to six degrees of freedom at costs starting from €243 ($281) per axis. At the recent Hannover Fair, igus had a stand dedicated to the robot kits, which have articulated joints driven by worm gears with stepper motors optionally built into the joints. The arms have been designed to operate safely in “collaborative” applications with human co-workers.

MCC is ‘first’ to marry arc prevention and resistance

03 May, 2016

Eaton has announced an arc-resistant version of its FlashGard MCC (motor control centre) technology, designed to prevent arc flash events and to protect personnel if an arc flash occurs. Eaton claims that it is the first manufacturer to combine arc-preventative and arc-resistant technologies in one MCC.

WEG unveils its first geared motors to be developed in-house

26 April, 2016

The Brazilian motor-maker WEG has launched its first-ever range of geared motors using gearboxes designed in-house and carrying the WEG name. The WG20 modular geared motors, unveiled at the Hannover Fair this week, have been developed in collaboration with WEG’s Austrian subsidiary, the gear technology specialist Watt Drive, which it bought in 2011.

Next-generation safety laser scanner has 275-degree field

18 April, 2016

The German sensing specialist Sick has announced a next-generation safety laser scanner that uses using a patented scanning technology, said to improve productivity and safety. The microScan3 has an unusually wide scanning angle of 275 degrees, an object resolution down to 30mm, a protective field range of up to 5.5m, and a warning field range of up to 40m.

  • To view a digital copy of the latest issue of Drives & Controls, click here.

    To visit the digital library of past issues, click here

    To subscribe to the magazine, click here



"Do you think that robots create or destroy jobs?"



Most Read Articles