The global site of the UK's leading magazine for automation, motion engineering and power transmission
28 May, 2024

Twitter link
News » Technology News 

First quantum sensors will deliver ‘unmatched accuracy’

11 November, 2020

The German sensor-maker Sick has signed an agreement with a specialist subsidiary of Trumpf called Q.ANT to make quantum optical sensor technologies available for industrial use, potentially allowing measurements to be made with previously impossible accuracy. They say they have already successful tested the world’s first quantum optical sensor for serial production. The first commercial versions, planned for 2021, will be used to analyse substances in the air with the ability to detect particles that are about two hundred times smaller than the width of a human hair.

VSDs are ‘first with on-board corrosive gas detection’

09 November, 2020

Mitsubishi Electric has released a new generation of variable-speed drives which, it claims, are the first to incorporate internal detection of corrosive gases which, combined with AI (artificial intelligence) functions, will extend their operating lives and reduce downtime. The compact FR-E800 drives also have built-in support for multiple networks – including CC-Link IE TSN (Time Sensitive Networking), Ethernet/IP, Profinet and Modbus TCP/IP – without needing costly option cards.

‘Revolutionary’ PCB windings halve the size of micromotors

27 October, 2020

A Belgian start-up, Mirmex Motor, has developed a new method for manufacturing high-power-density windings for micromotors that, it claims, will revolutionise traditional winding design and manufacturing methods. The technology, which is the result of seven years of r&d, uses windings formed from flexible printed circuits and is claimed to result in motors that are 50% smaller, 70% more dynamic, with a third of the heat losses of motors that use conventional copper windings, and can be assembled ten times faster.

‘More conductive’ copper will lead to more efficient motors

20 October, 2020

US researchers have developed a process that, they say, can boost the conductivity of copper wire by about 5%, thus either improving the efficiencies of electric equipment such as motors, or reducing their weight while operating with the same efficiency.

AI-based software will help manufacturers to save energy

19 October, 2020

Mitsubishi Electric has announced a software package that uses AI (artificial intelligence) to help save energy in manufacturing plants by identifying energy losses, diagnosing factors that could be causing these losses, and quantifying the potential effects of energy-saving measures.

Schneider and Orange install France’s first industrial 5G network

30 September, 2020

Schneider Electric has installed the first indoor 5G network in the French industrial sector at a factory in Le Vaudreuil in northern France that it uses to pilot digital transformation technologies. The aim of the installation, performed in collaboration with the telecoms operator Orange, is to use 5G to achieve reliable, scalable and sustainable communications.

Nanotubes boost copper's current capacity by 14%

28 September, 2020

US scientists have created a composite material that, they say, can boost the electrical current capacity of copper wires by 14%, while improving their mechanical properties – such as strength and weight – by up to 20% compared to pure copper. The researchers, from the US government’s Oak Ridge National Laboratory (ORNL), add that the material could be used in any component that uses copper, resulting, for example, in more efficient busbars, smaller connectors and ultra-efficient, high-power-density motors.

‘Class-leading’ heavy-lifting robot makes its debut in China

16 September, 2020

ABB has announced a new industrial robot which, it claims, offers “class-leading lifting ability and reach and path accuracy, in a faster, more compact package”. It unveiled the IRB 1300 robot at the 2020 China International Industry Fair (CIIF) in Shanghai, where it also announced several other automation developments including an inkjet technology that, it says, will paint cars 50% faster than previous techniques, and its vision for the hospital of the future, which includes a robotic pharmacy and a collaborative cell for medical laboratories.

SiC modules will cut losses by 70% over silicon IGBTs

15 September, 2020

Mitsubishi Electric has announced a second generation of silicon carbide (SiC) power modules, based on a newly developed SiC chip, that, it predicts, will lead to the development of smaller, lighter, more efficient power electronic equipment in various industrial fields, including variable-speed drives.

Autonomous high-bay forklifts are ‘the industry’s first’

10 September, 2020

US-based AutoGuide Mobile Robots claims to be offering the world's first autonomous mobile robots designed to automate racking and picking operations in high-bay warehouses. The AutoGuide Max-N High Bay counterbalanced forklifts can lift 1,100kg payloads to and from racks up to 11m high, and travel at speeds of up to 1.8m/s.

OS transforms cobots into ‘intelligent collaborators’

10 September, 2020

A Californian start-up has announced an AI-based robotics OS (operating system) that, it claims, will transform collaborative robots (cobots) into intelligent co-workers on manufacturing floors. After two years of r&d – including installations at major automotive manufacturers – Qobotix has unveiled its technology designed to make robots smarter and self-learning.

Oversampling brings greater accuracy to multi-axis servos

01 September, 2020

Beckhoff has upgraded the firmware in its AX8000 multi-axis servodrives to support oversampling, allowing multiple sampling of process data within one communication cycle, with the data being transferred via EtherCat. With an oversampling factor of up to 128, this allows higher-level controllers to transmit several setpoint positions or speeds to the drive within one cycle, which the drive then follows. In addition, measured variables can be recorded several times in the drive, and the buffered values can be made available to the controller within a single cycle.

Anti-viral coating protects equipment against Covid-19

01 September, 2020

The Brazilian industrial equipment manufacturer, WEG, has developed an anti-viral coating which, it claims, makes 99.9% of Coronavirus inactive within minutes of the virus making contact with the coated surface. The polyurethane-based coating is designed to protect industrial equipment used in high-risk environments, such as hospitals and laboratories, as well as for use on other types of machinery and on public transport systems.

Contour-based navigation needs no markers

14 August, 2020

The German sensor-maker Sick has announced a contour-based navigation technology for mobile platforms such as AGVs (automated guided vehicles), carts, forklifts and service robots, that allows them to move freely around a factory and warehouse without needing reflectors or other physical markers. The Lidar-Loc (localisation on contour) system guides the vehicles using pre-mapped contours.

AGV is the ‘first’ to use vision-based navigation

07 August, 2020

Nidec-Shimpo has announced what it claims is the first AGV (automatic guided vehicle) to use vision-based navigation. It says that its S-Cart-V AGV can be used not only in factories and warehouses, but also in changing environments such as commercial facilities or the service industry where there are people walking around and obstacles may appear or disappear suddenly.

  • To view a digital copy of the latest issue of Drives & Controls, click here.

    To visit the digital library of past issues, click here

    To subscribe to the magazine, click here



"Do you think that robots create or destroy jobs?"



Most Read Articles